Square Nipple Pipe

The square nipple pipe used in the nipple drinking system of Arian Manufacturing Industries is made of PVC, which, when installed and used correctly, will have the best efficiency in the breeding system. The square or square nipple pipe is the most widely used pipe used in the poultry drinking system due to its non-rotation. The nipple drinking system is the most popular all over the world. Research shows that chickens raised with this system have a better conversion rate than chickens raised with a conventional drinking system, and the mortality and slaughterhouse removal rate are lower in them.

In addition, nipples are generally a closed system and provide a water source with high sanitary standards for chickens. There are fewer bacteria, mineral deposits, garbage, etc. inside this system compared to an open system, and it prevents the occurrence and spread of some diseases that may occur with other drinking systems. The nipple drinking system is very hygienic and due to the individual use of the poultry, the possibility of spreading diseases is minimized and it is compatible with the physiological system of the poultry body.

This system, by providing clean and sufficient water for all the chickens, causes regular and rapid growth of the chickens and, due to the special design, provides the ability to use it from one day old until the end of the period for various chickens such as broilers, mothers, layers and turkeys and increases the capacity of the hall. Also, due to the lack of water, it improves the quality of the bedding and requires less labor and does not need to be washed daily.

Advantages of using square nipple pipe

No rotation of the drinking pipe and vertical placement of the nipples from the beginning to the end of the drinking line
Uniform distribution of water in all nipples due to the larger cross-sectional area in the round pipe drinking pipe
Durable support pipe with exclusive interlocking technology without the use of connectors
Using a high-flow end-of-line valve suitable for washing lines
Has a water level indicator tube on the end-of-line valve equipped with a vent valve
Has a shocker wire with the ability to connect

Price and purchase of square nipple pipe

The square nipple drinking pipe is produced in 4-meter branches and is ready for drilling in Arian Manufacturing Industries. Normally, after registering the customer’s order and depending on the poultry farmer’s interest, round or square nipple drinking pipes are drilled to place the nipple needle. These holes are mainly made at a distance of 33 or 25 cm. If you purchase nipples and drinking pipes from Arian Production Industries, the shipment will be made after the nipple is installed on each branch. If you need sizes smaller than 4 meters, you can write your measurement in the purchase description section when placing your order. The shipping department officials will send the desired measurement in the same measurement if possible. For more information and more secure purchase, you can contact our sales managers.